Gender Reveal Cannon Material Safety Data Sheet


Material Safety Data Sheet

1 Identification of the substance/preparation and of the company/undertaking

  • Trade Name: Confetti
  • Trade Code:25*4cm 25*5cm 30*4cm 30*5cm 40*4cm 40*5cm 45*5cm 50*5cm 60*5cm 80*5cm
  • End Uses:Festival items
  • Manufacturer/Supplier:Holi Powder LLC
    • 767 Auto Mall Dr Ste 11, American Fork, Utah 84003
    • Tel: (385) 498-3577
  • Further information obtainable from: Holi Powder LLC
  • Information in case of emergency:Holi Powder LLC


2 Hazards Identification

  • NFPA Ratings (scale 0-4)

       Health = 0; Fire = 1; Reactivity = 0

  • Classification of the substance or mixture
  • Classification according to Regulation (EC) No 1272/2008: The product is not classified according to the CLP Regulation.
  • Classification according to Directive 453/2010/EC or Directive 1907/2006/EC: N/A
  • Emergency Overview: Irritating vapors to respiratory system and eyes may form when polymer is processed at high temperatures or burning. Molten or heated material in skin contact can cause severe burns.
  • Routes of Entry: For Hot Material: Skin contact, Eye contact, Inhalation.
  • Potential Acute Health Effects:
    • Eyes: Under normal circumstances products is no eye contact hazard.
      • Heated Polymer: Eye contact can cause serious thermal burns. Vapors or fume formed may be irritating to the eye when polymer is heated or burning.
    • Skin: No known acute effects of this product resulting from skin contact. However, in light of good industrial hygiene, exposure to any chemical should be kept to a minimum.
    • Heat Melted or Burning Polymer: Skin contact can cause serious thermal burns.
    • Inhalation:Negligible at room temperature. Irritating vapors or fume can be irritating to the upper respiratory tract when the polymer is processed at high temperatures or burning.
    • Ingestion:This product is not toxic, no effects are expected for ingestion of small amounts.
  • Potential Chronic Health Effects:
    • Carcinogenic Effects: This Material is not a carcinogen. Classified NONE by NTP, NONE, OSHA and by IARC.
    • Mutagenic Effects: N/A
    • Teratogenic Effects: N/A
  • Medical Conditions Aggravated by Overexposure: There is no known effect from chronic exposure to this product. Repeated or prolonged exposure is not known to aggravate any medical condition.
  • Overexposure/Signs/Symptoms:No Information available.


3 Composition/information on ingredients

  • Description: Mixture of substances listed below with additions.

Components Number:

CAS Number

Weight Percent (%)

Acrylonitrile Butadiene Styrene                  (ABS)






Polyvinyl Chloride                                           (PVC)




--      --      --



--      --      --



4 First Aid Measures

  • After Inhalation: The material is not expected to present an inhalation hazard.
  • After Skin Contact: Cool skin rapidly if contacted with molten polymer. Obtain medical attention for thermal burn.
  • After Eye Contact: Immediately flush eyes with plenty of water for a few minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
  • After Swallowing: If symptoms persist consult doctor.

5 Fire-fighting Measures

  • General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Decomposes at high temperatures, resulting in toxic and corrosive products. Containers may explode when hot.
  • Extinguishing Media: Use water spray, dry chemical, carbon dioxide or chemical foam. Cool containers with flooding quantities of water until well after fire is out.
  • Auto Ignition Temperature: > 260°C (estimated).
  • Special Fire & Explosion Hazards:Dense smoke emitted when burned without sufficient oxygen. Heating or burning will release toxic gases or fumes, negligible explosion hazard.
  • Unusual Fire or Explosion Hazards:
  • Other Information: Wear self-contained breathing apparatus and complete personal protective equipment when potential for exposure to products of combustion exists.


6 Accidental Release Measures

  • Small Spill and Leak: This product is solid, Small leak is meaningless, where scattered only need to pick it up. Good housekeeping must be maintained at all times to avoid stumbling hazard.
  • Large Spill and Leak: No Danger, to put the leaked products into a convenient waste disposal container.


7 Handling and Storage

  • Handling: Handling of plastic may form nuisance dust. Protect personnel. Pneumatic material handling and processing equipment may generate dust of sufficiently small particle size that, when suspended in air, may be explosive. Dust accumulations should be controlled through a comprehensive dust control program that includes, but is not limited to, source capture, inspection and repair of leaking equipment, routine housekeeping and employee training in hazards. See NFPA654.
  • Storage: Keep in a cool place. Ground all equipment containing material. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents.


8 Exposure controls/personal protections

  • Ventilation and Engineering Controls:No special ventilation and engineering controls are required, the handling of these products need good ventilation.
  • Respiratory Protection: No special respiratory protection is required fro use of these products. If respiratory protection is needed, use only protection authorized in the US Federal OSHS Standard, applicable US State regulations.
  • Body Protection: No special protective clothing is required.
  • Protective Gloves: Unnecessary, to use rubber gloves or other insulated gloves.
  • Eye Protection: Unnecessary, to wear chemical goggles or face shield.


9 Physical and Chemical Properties





Change in condition:

Melting Point

Thermal Decomposition Point:


Not Available

Not Available

Tensile Strength

Not Available


Product is not self-igniting

Danger of explosion

Product does not present an explosion hazard


Relative Density:

Vapor Density:

Evaporation Rate:


Not Available

Not Available

Not Applicable

Solubility in /Miscibility with Water:





Not Available




Not Available


10 Stability and Reactivity

  • Chemical Stability: The product is stable.
  • Incompatibility with Other Materials:Incompatible or reactive with nitric acid and sulfuric acid.
  • Hazardous Decomposition Products: The following combustion products may be generated: Carbon dioxide, carbon monoxide, water vapor and trace volatile organic compounds.
  • Hazardous Polymerization: Hazardous polymerization will not occur.


11 Toxicological Information

  • Toxicity to Animals:
    • LD50: Not Available
    • LC50: Not Available
  • Chronic Effects on Humans:
    • Carcinogenic Effects: Classified NONE by NTP, NONE by OSHA. 3(not classifiable for humans) by IARC.
    • Other Toxic Effects on Humans: None
    • Carcinogenicity: None
    • Mutagenicity: None
    • Teratogenicity: None


12 Ecological Information

  • Instability: Not Applicable
  • Persistence/Degradability: Like plastic in the long term.
  • Environmental Precautions: It must be disposed of by incineration or in an authorized waste deposit.


13 Disposal Considerations

  • Product: Must be disposed of in accordance with applicable Federal, State and Local Regulations.
  • Recommendation: Must not be disposed together with household garbage. Do not allow product to reach sewage system.
  • Unclean Packaging: Recommendation Disposal must be made according to official regulations.


14 Transport Information

  • DOT Classification for Bulk Shipments: Not a DOT controlled material.
  • DOT Proper Shipping Name: Not Applicable
  • UN Number: Not Applicable
  • Packing Group: Not Applicable
  • USCG Poper Shipping Name: Not Applicable
  • Marine Pollutant: Not Applicable
  • Hazardous Substance Reportable Quantity:Not Available.
  • Special Provisions for Transport: Not Applicable
  • TDG Classification: Not controlled under TDG.
  • ADR/RID Classification: Not controlled under ADR.
  • IMO/IMDG Classification: Not Controlled under IMDG.
  • ICAO/IATA Classification: Not Controlled under IATA.


15 Regulatory Information

  • HCS Classification: This product is not a “Hazardous Chemical” as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200
  • US Federal Regulation: Not Available
  • TSCA Inventory: All components are exempted.
  • Sara 301/302/303: No chemicals in this product are listed as extremely hazards substances in 40 CFR 355, Emergency Planning and Notification (Appendix A to Part 355).
  • Sara 304: No chemicals in this product require reporting under the requirement of 40 CFR 355, Emergency Planning and Notification (Sara extremely hazardous substances listed in Appendix A to Part 355 or CERCLA hazardous substances listed in Table 302.4 of 40 CFR Part 302).
  • Sara 313: This product contains no chemicals in excess of the applicable de minims concentration that are subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372 (Table 372.65).
  • Clean are act (CAA) 112 accidental release prevention: No products were found.
  • Clean are act (CAA) 112 regulated flammable substances: No products were found.
  • Clean are act (CAA) 112 regulated toxic substances: No products were found.


16 Other Information

The contents and format of this MSDS are in accordance with ISO Commission Directive ISO11014:2009.



The information in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for the product. If the product is used as a component in another product, this MSDS information may be applicable.

Emergency Telephone Number: (385) 498-3577

Department issuing MSDS: Holi Powder LLC